S5735-L8P4S-A-V2 HUAWEI S5700 Series Ethernet 8-port Switch

Products > Network Switch > S5735-L8P4S-A-V2 HUAWEI S5700 Series Ethernet 8-port Switch

S5735-L8P4S-A-V2 HUAWEI S5700 Series Ethernet 8-port Switch

S5735-L8P4S-A-V2 HUAWEI S5700 Series Ethernet 8-port Switch
new retail
1 year
in stock

Overview

Table 4-308 Basic information about the S5735-L8P4S-A-V2

ItemDetails
DescriptionS5735-L8P4S-A-V2 (8*10/100/1000BASE-T ports, 4*GE SFP ports, PoE+, AC power)
Part Number98011986
ModelS5735-L8P4S-A-V2
First supported versionV600R022C01

Components

Figure 4-107 S5735-L8P4S-A-V2 appearance

1

One MODE button

2

Eight 10/100/1000BASE-T PoE+ ports

3

Four 1000BASE-X ports

4

One console port

5

One PNP button

NOTICE: 

To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.

6

AC socket

NOTE: 

It is used with an AC power cable.

7

Jack for AC power cable locking strap

NOTE: The AC power cable locking strap is not delivered with the switch.

8

Ground screw

NOTE: It is used with a ground cable.

Ports

Table 4-309 Ports on the S5735-L8P4S-A-V2

PortConnector TypeDescriptionAvailable Components
10/100/1000BASE-T portRJ45A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s.

Ethernet cable

1000BASE-X portSFPA 1000BASE-X port can send and receive data at 1000 Mbit/s.
Console portRJ45The console port is connected to a console for on-site configuration.

Console cable

Indicators and Buttons

The S5735-L8P4S-A-V2 has similar indicators to those on the S5735-L8P2T4X-A-V2. For details, see the S5735-L8P2T4X-A-V2.

Power Supply System

The switch has a built-in AC power module and does not support pluggable power modules. The built-in power module can provide 125 W PoE power, which ensures full PoE power on 8 ports in compliance with 802.3af or on 4 ports in compliance with 802.3at.

Heat Dissipation System

The switch has a built-in fan for forced air cooling. Air flows in from the left side and front panel, and exhausts from the right side.

When working properly at a normal temperature, the device meets the desktop-class noise requirements. However, the fan speed may be high and the noise may be loud during device startup.

This figure only shows the airflow direction and does not depict the actual device.

Technical Specifications

Table 4-310 Technical specifications of the S5735-L8P4S-A-V2

ItemSpecification
Dimensions without packaging (H x W x D) [mm(in.)]

Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 320.0 mm x 210.0 mm (1.72 in. x 12.6 in. x 8.27 in.)

Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 320.0 mm x 217.0 mm (1.72 in. x 12.6 in. x 8.54 in.)

Dimensions with packaging (H x W x D) [mm(in.)]90.0 mm x 465.0 mm x 380.0 mm (3.54 in. x 18.31 in. x 14.96 in.)
Chassis height [U]1 U
Chassis materialMetal
Weight without packaging [kg(lb)]2.23 kg (4.92 lb)
Weight with packaging [kg(lb)]3.05 kg (6.72 lb)
Typical power consumption [W]19.99 W
Typical heat dissipation [BTU/hour]68.21 BTU/hour
Maximum power consumption [W]
  • Without PoE: 25.09 W

  • Full PoE load: 166.65 W (PoE: 125 W)

Maximum heat dissipation [BTU/hour]
  • Without PoE: 85.61

  • Full PoE load: 568.63

Static power consumption [W]17.19 W
MTBF [years]69.71 years
MTTR [hours]2 hours
Availability> 0.99999
Noise at normal temperature (acoustic power) [dB(A)]47 dB(A)
Noise at normal temperature (acoustic pressure) [dB(A)]35 dB(A)
Number of card slots0
Number of power slots0
Number of fans modules1
Redundant power supplyNot supported
Long-term operating temperature [°C(°F)]-5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5905.44 ft.)
Restriction on the operating temperature variation rate [°C(°F)]

When the altitude is 1800–5000 m (5906–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

Devices cannot start when the temperature is lower than 0°C (32°F).

Storage temperature [°C(°F)]–40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH]5% RH to 95% RH (non-condensing)
Long-term operating altitude [m(ft.)]0–5000 m (0–16404 ft.)
Storage altitude [m(ft.)]0-5000 m (0-16404 ft.)
Power supply modeAC built-in
Rated input voltage [V]AC input: 100–240 V AC; 50/60 Hz
Input voltage range [V]AC input: 90 V AC to 300 V AC; 47 Hz to 63 Hz
Maximum input current [A]3 A
Memory2 GB
Flash memoryPhysical space: 1 GB
Console portRJ45
Eth Management portNot supported
USBNot supported
RTCNot supported
RPS inputNot supported
Service port surge protection [kV]Common mode: ±7 kV
Power supply surge protection [kV]Differential mode: ±6 kV; common mode: ±6 kV
Ingress protection level (dustproof/waterproof)IP20
Types of fansBuilt-in
Heat dissipation modeAir cooling for heat dissipation, intelligent fan speed adjustment
Airflow directionAir intake from left and front, air exhaustion from right
PoESupported
Certification

EMC certification

Safety certification

Manufacturing certification