S5735-S24T4XE-V2 Huawei 24*10/100/1000BASE-T, 4*10GE SFP+, 2*12GE Stack Ports Switch

Products > Network Switch > S5735-S24T4XE-V2 Huawei 24*10/100/1000BASE-T, 4*10GE SFP+, 2*12GE Stack Ports Switch

S5735-S24T4XE-V2 Huawei 24*10/100/1000BASE-T, 4*10GE SFP+, 2*12GE Stack Ports Switch

S5735-S24T4XE-V2 Huawei 24*10/100/1000BASE-T, 4*10GE SFP+, 2*12GE Stack Ports Switch
new retail
3 year
in stock

Overview

Table 4-558 Basic information about the S5735-S24T4XE-V2

ItemDetails
DescriptionS5735-S24T4XE-V2 (24*10/100/1000BASE-T ports, 4*10GE SFP+ ports, 2*12GE stack ports, without power module)
Part Number98012016
ModelS5735-S24T4XE-V2
First supported versionV600R022C01

Components

Figure 4-191 S5735-S24T4XE-V2 appearance

1

One MODE button

2

Twenty-four 10/100/1000BASE-T ports

3

Four 10GE SFP+ ports

4

Two stack ports

5

One console port

6

One USB port

7

One PNP button

NOTICE: 

To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.

8

Ground screw

NOTE: It is used with a ground cable.

9

Power module slot 1

NOTE: 

Applicable power modules:

10

Power module slot 2

NOTE: 

Applicable power modules:

Ports

Table 4-559 Ports on the S5735-S24T4XE-V2

PortConnector TypeDescriptionAvailable Components
10/100/1000BASE-T portRJ45A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s.

Ethernet cable

10GE SFP+ optical portSFP+A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s.
Stack portSFP+A stack port connects multiple switches through stack cables and virtualize them into one switch logically. It is used only in stacking scenarios and does not need to be configured. In a stack, the working rate of a single port is increased to 12 Gbit/s by default.
Console portRJ45The console port is connected to a console for on-site configuration.

Console cable

USB portUSB 2.0 Type A

The USB port can have a USB flash drive connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0.

USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor.

USB flash drive

Indicators and Buttons

The S5735-S24T4XE-V2 has similar indicators to those on the S5735-S24P4XE-V2 except that the S5735-S24T4XE-V2 does not have a PoE mode indicator. For details, see the S5735-S24P4XE-V2.

Power Supply System

The switch can use a single power module or two power modules for 1+1 power redundancy. The power modules with natural heat dissipation and the power modules with fan cannot be used at the same time.

Heat Dissipation System

The switch has one built-in fan for forced air cooling. Air flows in from the left, right, and front sides, and exhausts from the rear panel.

This figure only shows the airflow direction and does not depict the actual device.

Technical Specifications

Table 4-560 Technical specifications of the S5735-S24T4XE-V2

ItemSpecification
Dimensions without packaging (H x W x D) [mm(in.)]

Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.40 in. x 16.54 in.)

Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 446.0 mm (1.72 in. x 17.40 in. x 17.56 in.)

Dimensions with packaging (H x W x D) [mm(in.)]185.0 mm x 650.0 mm x 550.0 mm (7.28 in. x 25.59 in. x 21.65 in.)
Chassis height [U]1 U
Chassis materialMetal
Weight without packaging [kg(lb)]4.34 kg (9.57 lb)
Weight with packaging [kg(lb)]7.48 kg (16.49 lb)
Typical power consumption [W]26.20 W
Typical heat dissipation [BTU/hour]89.40 BTU/hour
Maximum power consumption [W]
  • 33.10 W (with two 80 W AC power modules)

  • 45.75 W (with two 180 W AC power modules)

  • 85.20 W (with two 1200 W DC power modules)

Maximum heat dissipation [BTU/hour]
  • 112.94 (with two 80 W AC power modules)

  • 156.10 (with two 180 W AC power modules)

  • 290.71 (with two 1200 W DC power modules)

Static power consumption [W]23.2 W
MTBF [years]168.93 years
MTTR [hours]2 hours
Availability> 0.99999
Noise at normal temperature (acoustic power) [dB(A)]47 dB(A)
Noise at normal temperature (acoustic pressure) [dB(A)]35 dB(A)
Number of card slots0
Number of power slots2
Number of fans modules1
Redundant power supply

1+1

Power modules without fans and power modules with fans cannot be installed in the same chassis.

Long-term operating temperature [°C(°F)]-5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5905.44 ft.)
Restriction on the operating temperature variation rate [°C(°F)]

When the altitude is 1800–5000 m (5906–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

Devices cannot start when the temperature is lower than 0°C (32°F).

Storage temperature [°C(°F)]–40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH]5% RH to 95% RH (non-condensing)
Long-term operating altitude [m(ft.)]0–5000 m (0–16404 ft.)
Storage altitude [m(ft.)]0-5000 m (0-16404 ft.)
Power supply modePluggable power supply
Rated input voltage [V]
  • AC input: 100 V AC to 240 V AC; 50/60 Hz

  • High-voltage DC input: 240 V DC

  • DC input: –48 V DC to –60 V DC

Input voltage range [V]
  • AC input: 90 V AC to 290 V AC; 45–65 Hz

  • High-voltage DC input: 190 V DC to 290 V DC

  • DC input: -38.4 V DC to -72 V DC

Maximum input current [A]The current specifications are related to the pluggable power module. For details, see Pluggable Power Modules.
Memory2 GB
Flash memoryPhysical space: 1 GB
Console portRJ45
Eth Management portNot supported
USBSupported
RTCNot supported
RPS inputNot supported
Service port surge protection [kV]Common mode: ±7 kV
Power supply surge protection [kV]
  • Configured with AC power modules: ±6 kV in differential mode and ±6 kV in common mode

  • Configured with DC power modules: ±2 kV in differential mode and ±4 kV in common mode

Ingress protection level (dustproof/waterproof)IP20
Types of fansBuilt-in
Heat dissipation modeAir cooling for heat dissipation, intelligent fan speed adjustment
Airflow directionAir intake from left, front, and right and air exhaust from rear
PoENot supported
Certification

EMC certification

Safety certification

Manufacturing certification