KVR21E15D8K2/32 Kingston 32GB (16GB 2Rx8 2G x 72-Bit x 2pcs.) PC4-2133 CL15 288-Pin DIMM Kit

Products > Memory > KVR21E15D8K2/32 Kingston 32GB (16GB 2Rx8 2G x 72-Bit x 2pcs.) PC4-2133 CL15 288-Pin DIMM Kit

KVR21E15D8K2/32 Kingston 32GB (16GB 2Rx8 2G x 72-Bit x 2pcs.) PC4-2133 CL15 288-Pin DIMM Kit

KVR21E15D8K2/32 Kingston 32GB (16GB 2Rx8 2G x 72-Bit x 2pcs.) PC4-2133 CL15 288-Pin DIMM Kit
new retail
1 year
in stock

DESCRIPTION

This document describes ValueRAM's KVR21E15D8K2/32 is a kit of two 2G x 72-bit (16GB) DDR4-2133 CL15 SDRAM (Synchronous DRAM), 2Rx8, ECC, memory module, based on eighteen 1G x 8-bit FBGA components. Total kit capacity is 32GB. The SPD is programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:


FEATURES

• Power Supply: VDD=1.2V Typical

• VDDQ = 1.2V Typical

• VPP - 2.5V Typical

• VDDSPD=2.2V to 3.6V

• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

• Low-power auto self refresh (LPASR)

• Data bus inversion (DBI) for data bus

• On-die VREFDQ generation and calibration

• Dual-rank

• On-board I2 serial presence-detect (SPD) EEPROM

• Temperature sensor with integrated SPD

• 16 internal banks; 4 groups of 4 banks each

• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

• Selectable BC4 or BL8 on-the-fly (OTF)

• Fly-by topology

• Terminated control command and address bus

• PCB: Height 1.23” (31.25mm)

• RoHS Compliant and Halogen-Free

image.png